Launch guide
Deploy a token. Launch it properly. Know what you made.
Anyone can deploy a token in minutes. Most new devs don't know what they just created. Buyers do, and they will check. Read this first. It takes five minutes and it's not financial advice.
How it works
Two words get mixed up all the time, so here is how we use them:
- Deploy is when your token is created (minted). It exists, and every coin sits in your wallet.
- Launch is when liquidity is added. That is the moment the token gets a price and people can buy and sell it.
Then you protect the pool and prove it:
- Deploy the token from your wallet.
- Add liquidity to launch it.
- Burn or lock the LP tokens, then show people the proof.
1. Deploying: creating the token
- You pick the basics. Name, symbol, total supply. Fees and limits are optional.
- Your wallet signs one transaction. The token is created on-chain from your wallet. Your keys stay with you. Listpad never asks for a seed phrase or a private key.
- The code goes public. That's called verifying. Anyone can read exactly what your token does.
- Every token lands in your wallet. It exists. Nobody can buy it yet. It has no price.
๐ Key point: after deploying you own tokens, not a market. That comes next.
2. Launching: no liquidity, no price
A liquidity pool is a smart contract holding two things: your token and a main coin like BNB or ETH. The price is the ratio between them. Adding the first liquidity is what launches the token.
Example. You put 1,000,000 tokens and 1 BNB in a pool. One token costs 1 รท 1,000,000 = 0.000001 BNB. Someone buys: BNB goes in, tokens come out, price goes up. Someone sells: price goes down. The smaller the pool, the harder the swing.
You, the dev, add the first liquidity. A tiny pool is easy to move and easy to drain. Buyers see that and walk away.
๐ Key point: no liquidity means no price and no trading. More liquidity means steadier prices.
3. LP tokens are the keys to the pool
Add liquidity and the pool hands you LP tokens. Think of them as a receipt. Whoever holds the receipt can pull the assets back out.
That's why buyers ask about them. If the dev still holds the LP tokens, the dev can withdraw all the BNB at any moment and leave everyone with tokens nobody can sell. That's a rug pull.
๐ Key point: whoever holds the LP tokens holds the pool.
4. Burn it or lock it
Burn
Send the LP tokens to a dead address. Nobody holds the keys to it:
0x000000000000000000000000000000000000dEaD
That liquidity can never be withdrawn. Ever. Burn only what you're sure you want in the pool for good.
Lock
Hand the LP tokens to a locker contract. It holds them until a date you choose, then lets you take them back. Buyers can see the unlock date. Pick this if you might need the liquidity later.
What neither one fixes
A burned or locked pool does not stop:
- a sell fee so high that selling is pointless,
- the dev selling their own huge share of the supply,
- powers left in the contract, like changing fees or blocking wallets.
๐ Key point: burn if it's forever, lock if it's temporary. Either way, tell people and show the proof.
5. How to lock LP on PinkSale and others
You don't need to build anything. Locker services do it for a small fee. Well-known ones include PinkSale (PinkLock), UNCX and Team Finance. The steps are almost the same on each:
- Open the locker's official site. Type the address yourself or use the link from their own socials. Fake lookalike sites exist.
- Connect the wallet that holds the LP tokens and switch to the same network as your token.
- Choose the LP lock option (not the plain token lock) and paste the LP token address. That is the pair contract of your pool. You can find it on the DEX's pool page or on DexScreener.
- Set the amount and the unlock date. Locking all of it for a long time looks strongest to buyers.
- Approve, then confirm the lock. Both are wallet transactions that cost a little gas.
- Share the lock link. Post it in your community and on your token page so anyone can check it.
Locking works for V2-style LP tokens as shown above. V3 and V4 positions are NFTs, so pick a locker that says it supports them.
๐ Key point: a lock only counts if people can open the link and verify it. Listpad is not a locker and does not run these services, so always check the details on the locker's own site.
6. Bonding curves, V2, V3 and V4
A token's life on a launchpad has up to two stages. Knowing both makes every launchpad easy to read.
Stage 1: the bonding curve
Most launchpads start every token on their own bonding curve. It is a formula inside the platform's contract: the more people buy, the higher the price goes. There is no pool to fill and no first liquidity from you.
Launchpads that work this way (examples only): pump.fun on Solana and four.meme on BNB. When enough has been bought, the token graduates to a regular pool (stage 2). On pump.fun that pool is PumpSwap, its own exchange on Solana. On four.meme it is Pancake V2. You can see this on DexScreener, which shows the pool and the launchpad it came from, for example "PumpSwap via Pump.fun" or "Pancake V2 via Four".
Good at: a fast, cheap start where trading begins at once. Watch out: the platform sets the rules, and you depend on how it handles the move to a normal pool.
Stage 2: the pool, in three versions
This is the pool where trading continues, or where it starts if the launchpad skips the curve. There are three generations.
V2: the classic pool
One pool, one normal LP token, liquidity spread across every price. The simplest design.
Pools: Pancake V2, Uniswap V2.
Launchpads that end up here (examples only): four.meme, where tokens graduate to Pancake, and Listpad, which launches into Pancake V2 on BNB and Uniswap V2 on Ethereum and Robinhood.
Good at: being easy to understand, burn, lock and verify. Watch out: small pools swing a lot.
V3: the efficient pool
You choose a price range, and your liquidity only works inside it, so the same money goes further. Your share is an NFT, not a normal LP token.
Pools: Uniswap V3, Pancake V3.
Launchpads that use it (examples only): Clanker on Base, which places single-sided liquidity in a Uniswap V3 pool, and Pons on Robinhood Chain, where tokens trade in Uniswap V3 pools.
Good at: deeper liquidity for the same money. Watch out: if the price leaves your range, trading stops. Locking needs a locker that supports NFTs.
V4: the programmable pool
Pools can carry "hooks", extra code that runs on every trade, for example custom fees or rules. Positions live inside one shared contract.
Pool: Uniswap V4.
Launchpad that uses it (example only): Flaunch on Base, built on V4 hooks.
Good at: flexibility, since the pool itself can have its own rules. Watch out: a hook you didn't read can do whatever it was coded to do. Read it before you trust it.
๐ Key point: a curve gives the easiest start, V2 is the easiest to verify, V3 is the most efficient and V4 is the most flexible. Whichever one you use, find out who can withdraw the liquidity before you call it safe.
7. The settings, decoded
- Total supply
- How many tokens exist. A bigger number is not a better token. It just means a lower price per token.
- Buy and sell fees
- A cut of every trade, sent to the wallets you choose: marketing, development, or back into liquidity. High fees scare buyers and get flagged by scanners. Keep them low. Never set a sell fee you can't defend.
- Max wallet and max per transaction
- Caps that stop one wallet from buying too much. They slow bots down in the first minutes. Set them so normal buyers never get blocked.
- Launch window
- A short stretch right after liquidity is added, with an extra fee. It ends on its own and can't be extended later.
- Add liquidity and Creator initial buy together
- Both in one transaction, so no bot can buy before you do.
8. Mistakes that get devs flagged
- Sitting on the LP tokens and saying nothing. Burn or lock them and show the proof.
- Adding almost no liquidity. One trade can move or empty a tiny pool.
- Holding nearly the whole supply in one wallet. Buyers will assume you can dump it all.
- Promising returns. Nobody can. It's a fast way to get reported.
- Sharing your seed phrase or private key. With anyone. For any reason. Listpad staff never message you first and never ask for them.
Quick glossary
- Deploy
- Creating (minting) the token on the blockchain.
- Launch
- Adding liquidity so the token has a price and can be traded.
- Wallet
- The app that holds your coins and signs your transactions.
- Smart contract
- A program that lives on the blockchain and runs by itself.
- Supply
- The total number of tokens that exist.
- Liquidity
- The tokens and coins held in a pool so people can trade.
- LP token
- Your receipt for what you put in a pool.
- Bonding curve
- A formula that sets the price as people buy, used by some launchpads instead of a normal pool at the start.
- Rug pull
- When a dev withdraws the pool and leaves holders with nothing.
- Honeypot
- A token you can buy but can't sell.
- Sniper
- A bot that buys the moment liquidity appears.
Ready?
Every setting is shown again on the launch page before you sign.